Pool Parameters; Controller Box Connections - POOL Autosalt Manual De Usario

Keys Actions
Long press 3s on: switch off the device.
Enter in the setting menu (see § 6.5).
Launch a super chlorination during 24 hours.
To use exceptionally in case of high heavy rains, troubled water and any other factor
leading to a greater need of chlorine.
To stop a super chlorination, press again on
Short press on : shows advices about the use of the device.

POOL PARAMETERS

3
Main display Main display
Press 3s on Press 3s on
Stand-by mode
water temperature
ON/OFF
4

CONTROLLER BOX CONNECTIONS

4 pins jack :
Amperometric chlorine
probe
BNC jack : PH probe
AUTOSALT®/POOLSQUAD®/POOLSQUAD® AMPERO/PRO - PAPI004082 – FR/EN/ES/DE - Rev.03.16
Water Water
temperature temperature
Press 3s on Press 3s on
Temperature Temperature
calibration calibration
(+/- 5°) (+/- 5°)
6 pins jack:
Salt/temperature sensor
IT index form :
Up date, repair...
.
Salt rate Salt rate
Press 3s on Press 3s on
Salt rate Salt rate
calibration calibration
Noticed and Noticed and
recommended recommended
filtration time filtration time
RECOMMENDED: 12h RECOMMENDED: 12h
NOTICED: 8h NOTICED: 8h
◄► ◄►
Press 3s on Press 3s on
Filtration alarm Filtration alarm
ON/OFF ON/OFF
BNC jack with red
circle for Pro version
12