Panasonic ER-GN30 Manual De Operación página 9

Before requesting repair
Please check the following:
Problem Possible cause
Deformation of the
blade
Wear in the blade
(Guideline for blade
The cutting
replacement:
performance has
approx. 3 years)
been diminished.
Battery has run out.
There is an odd
odor.
Inner blade has not
been cleaned.
Blade does not
move/rotate
smoothly.
Replacement blade
To maintain a sharp cutting performance, it is recommended to
replace the blade approximately every 3 years.
When replacing the blade, replace both the outer blade and the
inner blade at the same time.
SPECIFICATIONS
Model No. ER-GN30
AA LR6 alkaline dry-cell battery
Power source
(Sold separately)
This product is intended for household use only.
Action
Replace the
blade.
Replace the
battery.
Clean the inner
blade.
9