Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Safety Precautions
This product complies with the requirements of the following
European Community Directives: 2014/30/EU (Electromagnetic
Compatibility) and 2014/35/EU (Low Voltage) as amended by
2014/32/EU
pollution degree 2.
CAT I:
For signal level, telecommunication, electronic with
small transient over voltage
CAT II:
For local level, appliances, main wall outlets, portable
equipment
CAT III: Distribution level, fixed installation, with smaller transient
overvoltages than CAT IV.
CAT IV: Units and installations, which are supplied overhead
lines, which are stand in a risk of persuade of a
lightning,
overvoltage-diverter, current use counter.
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing), the following
safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
*
Do not use this instrument for high-energy industrial
installation measurement.
*
Do not exceed the maximum permissible input ratings (danger
of serious injury and/or destruction of the equipment).
*
The meter is designed to withstand the stated max voltages. If
it is not possible to exclude without that impulses, transients,
disturbance or for other reasons, these voltages are exceeded
a suitable prescale (10:1) must be used.
*
Disconnect test leads or probe from the measuring circuit
before switching modes or functions.
*
To avoid electric shock, disconnect power to the unit under
test and discharge all capacitors before taking any resistance
measurements.
(CE-Marking).
i.e.
Overvoltage
main-switches
-20-
category III
on
current
600V;
input,
Publicidad
Tabla de contenido
