Using The Needle Threader; Drawing Up The Bobbin Thread - Casa Lorente compakt 500E Manual De Instrucciones

Tabla de contenido

Publicidad

z
q
c
q
e
x
w
v
q
w
r

Using the needle threader

z Turn the handwheel toward you to raise the needle to
its highest position. Hold the needle threader knob q
and pull it down to its lowest position.
q Needle threader knob
Push the needle threader knob q to the back so that
x
the hook w is coming out from the backside of the
needle eye.
Hook the thread around the guide from the left.
Pass the thread under the threader hook w and draw
the thread to the right left.
w Needle threader knob
e Needle threader knob
c Push the needle threader knob q towards you to pull
out the needle thread as illustrated. Then push the
e
knob up to pull the needle thread as illustrated.
v Pull the needle thread through the needle eye.
* The needle threader can be used with a #11 to #16
needle or a blue needle.
Thread sizes 50 to 90 are recommended.

Drawing Up the Bobbin Thread

Raise the presser foot lifter.
Turn the power switch on.
Hold the needle thread with your finger.
q Presser foot lifter
w Needle thread
Press the needle up/down position button twice to pick up
the bobbin thread.
Draw up the needle thread to bring up a loop of the
bobbin thread.
e Bobbin thread
r Needle up/down position button
Slide 10 cm of both threads to the back under the presser
foot.
24

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido