Diaphragm replacement
Rubber diaphragms are a wearable part that will need servicing over time. Moisture, heat
and dust will all shorten the life of the diaphragms. Please follow the following steps when
installing replacement diaphragms.
• Remove the top cover housing for the air pump. Loosen the air chamber screws (1)
and remove the outer air chamber (2).
• Loosen the diaphragm nut (3) and remove the diaphragm depressor (4), electrostatic
membrane (5) and the damaged diaphragm (6).
• Install the new diaphragm ensuring that the rubber tabs align properly with the notches
on the inner air chamber.
• Once the diaphragm is seated properly, assemble the components by following the
previous steps in reverse order.
Warranty
All Typhoon Air Pumps carry a one year limited warranty. This limited warranty is extended
solely to the original purchaser commencing from the date of original purchase receipt.
The following apply:
• Manufacturer will replace parts found to be defective including pump body, housing,
electric cord, swing arm and internal moving parts.
• Air filter, flapper valves and diaphragms are wearable parts and not covered by
this warranty.
• A cut or altered power cord voids this warranty.
• A misused or abused air pump voids this warranty.
Warranty Claims
In case of warranty claims, the air pump should be returned to place of purchase
accompanied by original receipt.
4
3
5
6
1
2
5