Royal Catering RCFW 120PRO Manual De Instrucciones página 10

INTRODUCTION
This instruction manual gives the customer all the necessary information about the
appliance and the manufacturing standards applied, as well as all instructions for use
and maintenance so that the appliance can be used correctly maintaining its efficiency
in time.
This instruction manual is for the end user and for service personnel.
INDEX
1 INFORMATION ABOUT THE APPLIANCE
1.1 General Warnings
1.2 Safety Features Installed
1.3 Appliance Description
1.3.1 General Description
1.3.2 Constructive Characteristics
1.3.3 Appliance Elements
2 TECHNICAL DATA
2.1 Technical Characteristics
3 CONSIGNING THE APPLIANCE
3.1 Checking Packaging upon Consignment
3.2 Disposing of Packaging
4 INSTALLING THE APPLIANCE
4.1 Appliance Location
4.2 Wiring Diagrams RCFW 120PRO/RCFW 220PRO/RCFW 220EXPERT
4.3 Functional Check
5 USING THE APPLIANCE
5.1 Controls
5.2 Setting up the RCFW 120PRO/RCFW 220PRO/RCFW 220EXPERT FOR USE
5.3 Filling the Mincer (see fig 5)
6 REGULAR CLEANING
6.1 Generalities
6.2 Procedure to follow for Claening the Appliance
18
7 MAINTENANCE
7.1 Generalities
7.2 Foot Supports
7.3 Power Supply Cable
7.4 Push Button Label
7.5 Disk and Blade
8 SCRAPPING
8.1 Security
8.2 Customer Service
1 INFORMATION ABOUT THE APPLIANCE
1.1 General Warnings
• The appliance must only be used by personnel who has carefully studied this
manual and understood all the safety standards described herein.
• Although safety devices are installed on the appliance, avoid touching the moving
parts with your hands and avoid touching the appliance with wet hands.
• Before cleaning or servicing the appliance, disconnect the electricity power sup-
ply.
• When cleaning or servicing the RCFW 120PRO/RCFW 220PRO/RCFW 220EX-
PERT (safety protections removed) take into consideration all possible hazards-
Residual Risks.
• When cleaning or servicing the appliance always concentrate on what you are
doing and avoid any possible distractions.
• WARNING: The machine should be repaired by manufacturer or agent if the
machine faults.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
• Check the electricity power cable on a regular basis (to avoid electrical hazards
and twists in the cable always completely unwind it);a worn or damaged cable
causes a dangerous electrical hazard;aviod pressing the cable with weights or lea-
ving it on hearted or sharp cutting Surfaces and avoid pulling the cable to remove
the plug from the socket.
19