Tabla de contenido
Publicidad
Error
Lock does not react
It is not possible to enter Lock-ID
It is not possible to enter user code
Rotary knob cannot be rotated
Beeper does not work
LED does not work
The LED will blink red and a short
acoustic signal will sound
User badge does not open the lock
User badge cannot be taught-in
www.lista.com
Possible cause
No batteries installed
Batteries installed incorrectly
Batteries discharged
System error
Lock faulty
The two codes are not identical
Code does not have 8 digits
Code does not have 4 – 6 digits
Button 1 for adding user has not been
pressed
Rotary knob was rotated too early and is
blocking the solenoid armature
Battery discharged and solenoid no lon-
ger energises
Beeper function is switched off
LED faulty
Batteries discharged
Badge has not yet been saved
Badge has already been taught-in as ma-
ster badge
User badge is not compatible
Rectification
Install batteries
Install batteries correctly
Install new batteries
Remove batteries and re-fit
Replace lock
See adding Lock-ID
Enter code with 8 digits
Enter code with 4 – 6 digits
See adding user
Only rotate rotary knob once the green
LED is illuminated
Install new batteries
See adjusting volume of the beeper
Replace lock
Install new batteries
See adding user with master badge
Use user badge
Check RPID standard of the user badge
23
Publicidad
Tabla de contenido
