Descargar Imprimir esta página

LEXIBOOK Gravity VR Manual De Instrucciones página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Note: Your smartphone size must be between 4.7'' and 6 inches.
Make your GravityVR headset experience more convenient with the controller.
Notes:
If the controller is not connecting with any Bluetooth device after 5 minutes, the
system will automatically power off.
If there are no operations when connected to a device, the system will power off
after 10 minutes.
Step 2: Connect the controller to your smartphone
Once powered on, the controller will automatically enter the Bluetooth pairing mode.
Switch on the Bluetooth function of your smartphone and search for the device
named "Gamepad". If pairing is successful, the blue indicator will turn off.
Notes:
- If the connection is lost, the blue LED will flash again.
- The controller will automatically find and connect to the last paired Bluetooth
device.
- To switch modes, turn off the device and turn it back again while pressing the right
mode button. Then, follow the steps mentioned above.
- If the controller cannot boot or is unable to shutdown, please use a needle to press
the reset button located on the back of the device to restart.
- Before connecting, it is advised to switch off the WiFi on the smartphone to prevent
interferences.
Step 3: Please refer to your smartphone type (Android or iOs)
4
VR100Z_09IM1187_V16_289IL.indb 4
Step 3: Close the slide-out tray, put on
your GravityVR headset and adjust the
head strap
1
screen by moving your head. Once you
feel comfortable, you are ready for the
virtual reality immersive experience!
HOW TO USE YOUR CONTROLLER
Step 1: Turn the controller On and Off
Power ON the controller: Press and
hold the START button
indicator starts flashing. The controller
is ready to be paired with a Bluetooth
device. If the indicator is red, it means
that the controller has low battery and
must be recharged.
Power OFF the controller: Press and
hold the START button
LED turns off.
7
as well as focal length
2
and pupil distance
. Control the
3
until the blue
3
until the blue
5/5/17 6:45 pm

Publicidad

loading

Este manual también es adecuado para:

Vr100z