Inserting Interconnecting Tops - Sedus talk about Instrucciones De Montaje

5. Inserting interconnecting tops

Assembly
Push the thin end of the linking
1.
element between the rail and the
table top (directly into the gap
next to the table leg) (A)
Position the side recess in the
2.
thicker end of the linking ele-
ment against one side of the rail
suspension, then engage the
other side making sure it noti-
ceably locks into place (B)
Pull out the metal rail as far as
3.
possible using the grip recess;
the linking element is now fully
installed (C)
Set up the individual tables and
4.
fit the interconnecting top on
top of the four linking elements
Push in the locking rail bolt
5.
(on the interconnecting top)
as far as possible; the table tops
are now firmly connected (D)
Dismantling
Pull out the locking rail bolt
1.
(on the interconnecting top)
as far as possible
Lift the interconnecting top off
2.
the four linking elements
Push in the metal rails on the
3.
linking elements
A
C
B
D
13