Installation - Carbest 82277 Manual Del Usuario

UK
Carbest Pure Sine Wave Inverter with built-in priority switch| 82277/82278/82279
6�

INSTALLATION

FUSE 2,0 m
0,4 m 2,0 m
–
+
BATTERY
NOTE
• You can use one or more batteries. The best is to use 100 Ah or larger batter-
ies for a long back-up time.
• If external power is available, bypass relais will transfer it to the AC output.
• If external power is not available, the inverter converts the battery DC power into
AC power for all electrical appliances (Note: Inverter has to be switched ON).
6.1. There are cables inside of packaging� Use these cables to connect the unit
directly with the battery�
The input terminals on the rear side of the unit are Red-Positive 6+ and Black-Neg-
ative 6-. Connect the red cable to the red terminal and to the positive pole of the
battery. Connect the black cable to the black terminal and to the negative pole
of the battery. It is strictly recommended to add a fuse as close as possible to
the plus pole of battery. Make sure all connections are solid and secured. Poor
connections may cause overheating the cable and shorten the battery backup
time. (Ensure that the inverter and charger mode are all OFF before connecting
with the battery)
Extra: 0.4 m cable for positive pole as connecting piece between battery, fuse
and inverter.
PUBLIC POWER
20
AC-LOAD
230 V