Possible Operating Faults; Cleaning And Disassembly; Lid Assembly - WMF Urn CHANGE Manual De Instrucciones

6. POSSIBLE OPERATING FAULTS

1. Coffee / drink is only lukewarm
Causes: - Urn has not been pre-heated
Reason: The hot liquid loses heat quickly on contact with cold metal
- The liquid was not hot enough when placed in the urn (e.g. lukewarm coffee)
- The heating element is not in contact with the base of the coffee reservoir
2. Liquid is boiling
Cause: - The liquid level is too low. Either top up with more liquid or switch off
the heating source

7. CLEANING AND DISASSEMBLY

Remove the mains plug from the socket
Allow the Coffee Urn to cool.
Lift the coffee reservoir off the stand.
The heating element can now be removed and cleaned with a damp cloth.

8. LID ASSEMBLY

The plastic parts of the bayonet closure on the lid are easy to replace.
The lid unscrews completely and
screws back together:
WARNING: Do not pull out by the lead!
Please note: Never immerse the hot plate in
water or clean it under a running tap.
17