Cleaning And Maintenance - Bestron AVC800 Manual Del Usuario

Ocultar thumbs Ver también para AVC800:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
CLEANING AND MAINTENANCE - Cleaning the housing
1. Remove the plug from the wall socket.
2. Clean the outer surface of all parts with a damp cloth and a cleaner suitable for plastics.
WARNING:
Never immerse the appliance, plug or power cord in water.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
CLEANING AND MAINTENANCE - Cleaning or replacing the filter
For best results clean or replace the filter after every second or third use of the vacuum cleaner, or more
frequently if the filter is visibly blocked.
WARNING:
Clean the filter regularly to avoid that the filter becomes clogged and the engine overheated.
1. Remove the plug from the wall socket.
2. Remove the telescopic interlocking tube from the vacuum cleaner.
3. Remove the waste from the dust container (see "Removing waste from the dust container").
4. Remove the dust container from the vacuum cleaner by pressing the release button (see figure 6A) and
taking out the dust container (figure 6B).
A
5. Turn the upper lid (4) and remove it from the dust container (figure 6C).
6. Take the dust separation system and filter from the dust separation system (figure 6D).
7. Rinse the filter and the dust separation system thoroughly in lukewarm water.
8. Allow the filter to dry thoroughly.
9. Mount the holders and filters in the reverse sequence.
LET OP:
Water could penetrate into the appliance if the filter is not thoroughly dry. This could result in
(electrical) damage.
Do not clean the filter in a washing machine.
Do not dry the filter with a hairdryer.
D
C
29
B
6
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido