Input Channels - Yamaha DS2416 Manual De Instrucciones

Downloaded from: http://www.usersmanualguide.com/

Input Channels

De-emphasis (CH19, CH20)
DC Cut
ATT
Phase
4-band EQ
(12 EQ types per band)
Dynamics
(6 types)
Delay (CH1 to CH20)
On/Off
Fader
Pan
Channel meter
Bus send
Aux send
Automatically applied as needed
Automatically applied as needed
–96 to +12 dB (109 steps)
Normal/reverse
Frequency 20 Hz to 20 kHz (120 steps, 12 points/octave)
Gain
–18 to +18 dB (73 steps, 0.5 dB/step)
Q 0.1 to 10.0 (41 steps)
Threshold –54 to 0 dB (55 steps, 1.0 dB/step)
Attack 0 to 120 ms (121 steps, 1 ms/step)
Gain 0 to 18 dB (37 steps, 0.5 dB/step)
5 ms to 42.3 s, fs = 48.0 kHz (160 steps)
Release
6 ms to 46.0 s, fs = 44.1 kHz (160 steps)
Ratio
1.0 to infinity (16 steps)
Knee Hard, 1, 2, 3, 4, 5 (6 steps)
Range –70 to 0 dB (71 steps, 1.0 dB/step)
0.02 ms to 1.96 s, fs = 48.0 kHz (216 steps)
Hold
0.02 ms to 2.13 s, fs = 44.1 kHz (216 steps)
5 ms to 42.3 s, fs = 48.0 kHz (160 steps)
Decay
6 ms to 46.0 s, fs = 44.1 kHz (160 steps)
Width 1 to 90 (90 steps, 1.0 dB/step)
Mgain –18 to 0 dB (37 step, 0.5 dB/step)
Reduction
–18 to 0 dB (12 steps)
meter
0 to 2,600 samples (2,601 steps)
On/Off
–Infinity, –90 to +10 dB (128 steps)
33 steps
–72 to 0 dB (32 steps)
Pre/Post/Signal
Peak Hold
Decay Fast/Slow
Level –Infinity, –120 to 0 dB (128 steps)
Pre/Post (Pre pan/post pan)
On/Off
Level –Infinity, –120 to 0 dB (128 steps)
Pre/Post
(Pre fader/post fader)
On/Off
21
Specifications
DS2416—Owner's Manual