Power Supply - Bosch GCC 30-4 Professional Manual Original

Ocultar thumbs Ver también para GCC 30-4 Professional:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
OBJ_BUCH-2515-003.book Page 27 Tuesday, April 25, 2017 8:11 AM
– Download the app TrackMyTools from the relevant app store (Apple App Store,
Google Play Store) or access the web application at
https://web.bosch-trackmytools.com, where you can log in using your access
details.
You can now create and manage your inventory using the app/web-based application.
Help on using the app/web-based application and creating the inventory
Note: First, complete the tutorial for the app/web-based application. This will provide
you with a better overview of the procedure for creating the inventory and using the
software.
– Scan the data matrix code 8 on the side of the GCC 30–4 Professional module us-
ing the TrackMyTools app.
This means that the GCC 30–4 Professional module is clearly identified and can be
assigned to an inventory set up in the software.

Power supply

 Never remove the battery lid and the battery with an unsuitable object such
as a screwdriver or needle nose pliers. Using unsuitable objects can damage the
electronics or the gasket.
– To start using the product after purchasing it or to change the 4 battery, follow the
illustrations on the graphics pages. Observe the following advice when doing so.
Initial Operation (see figures B1 – B3)
– Using the battery compartment key 6, turn the battery compartment cover 1 anti-
clockwise until the tips of the arrows for the "open" symbol are aligned.
– Remove the protective film 9.
To do this, press down lightly at the position shown in the diagram B2 so that the
battery compartment cover 1 cannot drop down.
– To close it, using the battery compartment key 6, turn the battery compartment
cover 1 clockwise until the tips of the arrows for the "closed" symbol are aligned.
Battery Replacement (see figures C1–C6)
Only remove the used 4 battery with your fingers.
Insert the 4 battery into the 10 battery compartment with the plus terminal facing
upwards. The angle of the battery may vary depending on the system. It is not neces-
sary to push in the battery.
Before closing the battery lid 1, ensure that the gasket was not damaged when the
battery compartment was opened.
Bosch Power Tools
English | 27
1 609 92A 3W4 | (25.4.17)

Publicidad

Tabla de contenido
loading

Tabla de contenido