König DVB-S2 REC11 Manual De Usuario página 7

"Timer Setting"
If there is no programme, you cannot access the menu.
"Parental Lock"
You cannot access the menu without entering the correct password.
1. Open the "Input Password" window.
2. Enter the password: "0000".
3. Press the OK button.
"OSD Setting"
"Favorite"
1. Select the timer.
2. Press the OK button.
1. "Timer Mode": Select "On" or "Off".
2. "Timer Service": Select "Channel"
or "Record".
Notes:
• If you select "Channel", the next
menu item will be "Wakeup
Channel".
• If you select "Record", the next
menu item will be "Wakeup
Message".
3. - "Wakeup Channel": Select the
wake-up channel.
- "Wakeup Message": Select the
wake-up message.
4. "Wakeup Date": Press the digit
buttons to enter the date.
5. "On Time": Press the digit buttons
to enter the time.
6. "Duration": Press the digit
buttons to enter the duration.
1. "Menu Lock": Select "On" or "Off".
2. "Channel Lock": Select "On" or
"Off".
3. "New Password": Press the digit
buttons to enter the password.
4. "Confirm Password": Press the
digit buttons to enter the
password again.
1. "OSD Timeout": Select from 1 to
10.
2. "OSD Transparency": Select "Off",
"10%", "20%", "30%" or "40%".
1. Select the favourite. Press the OK
button.
2. Edit the favourite.
• "Name": Press the digit buttons
to edit the name. Press the OK
button.
• "Longitude": Select west
longitude or east longitude. Press
the digit buttons to edit the
longitude. Press the OK button.
3. - Press the yellow button to save
and exit.
- Press the blue button to exit
without saving.
8 8
"Other"
"Tools"
You cannot access the menu without entering the correct password.
"Information"
"Factory Setting"
"Upgrade by USB"
English
1. "LNB Power": Select "On" or "Off".
2. "Channel Play Type": Select "All",
"Free" or "Scramble".
3. "Channel Change": Select "Black
Screen" or "Freeze".
4. "Auto Standby": Select "On" or
"Off".
5. "Clock In Standby": Select "On" or
"Off".
1. Open the "Input Password"
window.
2. Enter the password: "0000".
3. Press the OK button.
1. Open the "Information" window
to view the information.
1. - Select "Yes" to return to the
factory settings. All channels and
settings will be deleted.
- Select "No" to cancel.
1. "Upgrade Mode": Select "allcode",
"maincode", "userdb", "defaultdb"
or "Dump".
When changing the upgrade mode,
"Upgrade File" will show the
corresponding file as follows:
Upgrade File format
mode
allcode *.abs
maincode *.abs
userdb *.abs
defaultdb *.abs
Note: The menu item becomes grey
when the USB device is not
connected.
2. "Upgrade File": Select the
upgrade file. Press the OK button.
3. "Start": Start upgrading by USB.