What'S New Under The Lid - Sears Kenmore 110.2813 410 Serie Manual De Uso

Cleaning with Less Water
Traditional agitator-style
washer
washplate wash system. The washer automatically adjusts the
water level to the load size—no water level selector is needed.
For best performance, it is recommended to load items in loose
heaps evenly around the washplate.
As the washer dampens and moves the load, the level of the
items will settle in the basket. This is normal, and does not
indicate that more items should be added.
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer. It is normal for some
of the load to be above the water line.

WHAT'S NEW UNDER THE LID?

Washplate
Washplate
Washer with low-water
washplate wash system
Automatic Load Size Sensing
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load. This may take several minutes before water is
Status Lights" section.
Initially the basket will start to spin prior to adding water, this is
part of the sensing process and is normal. This low-water wash
method uses less water and energy compared to a traditional
agitator-style washer.
Choosing the Right Detergent
excessive sudsing with a regular non-HE detergent. Using regular
detergent will likely result in longer cycle times and reduced
rinsing performance. It may also result in component failures and
noticeable mold or mildew. HE detergents are made to produce
the right amount of suds for the best performance. Follow the
manufacturer's instructions to determine the amount of detergent
to use and do not go over the Max line on the dispenser. See
"Using Laundry Product Dispensers" for more information.
Improved Cleaning
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils. This low
way to remove soils.
Normal Sounds You Can Expect
example, you may hear a clicking and hum at the beginning
of the cycle, as the lid lock goes through a self-test. There
washplate moves the load and as basket is slowing down to
stop. And sometimes, you may hear nothing at all, as the washer
determines the correct water level for your load or allows time
for clothes to soak.
3