Standard Accessories - Hitachi DH 36DBL Instrucciones De Manejo

φ
Drilling diameter, max.
max
Weight
(According to EPTA-Procedure 01/2003)
kg
Concrete
Steel
Wood
Wood screw
Hammering only function
Rotation only function
Rotation and hammering function
Switching ON
Switching OFF
Disconnect the battery
Clockwise rotation
Counterclockwise rotation
Remaining battery indicator switch
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed on page 184.
Standard accessories are subject to change without notice.
Before charging
While charging
Charge
indicator Charging
lamp complete
(RED /
BLUE /
Overheat
GREEN /
standby
PURPLE)
Charging
impossible
NOTE
When standby for cooling battery, UC36YSL cools the overheated battery by cooling fan.
Table 1
Indications of the charge indicator lamp
Lights for 0.5 seconds. Does not light for
Blinks
0.5 seconds. (off for 0.5 seconds)
(RED)
Lights Lights continuously
(BLUE)
Lights continuously
Lights
(GREEN)
(Continuous buzzer sound: about 6 seconds)
Lights for 0.3 seconds. Does not light for
Blinks
0.3 seconds. (off for 0.3 seconds)
(RED)
Lights for 0.1 seconds. Does not light for
Flickers 0.1 seconds. (off for 0.1 seconds)
(PURPLE)
(Intermittent buzzer sound: about 2 seconds)
5
APPLICATIONS
Rotation and hammering function
○ Drilling anchor holes
○ Drilling holes in concrete
○ Drilling holes in tile
Rotation only function (without dust extraction unit)
○ Drilling in steel or wood
(with optional accessories)
○ Tightening machine screws, wood screws
(with optional accessories)
Hammering only function
○ Light-duty chiselling of concrete, groove digging and
edging.
SPECIFICATIONS
The specifi cations of this machine are listed in the Table on
page 184.
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red. (At 1-second
intervals)
2. lnsert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2.
3. Charging
When inserting a battery in the charger, charging will
commence and the charge indicator lamp will light up
continuously in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up continuously in green.
(See Table 1)
● Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1, according to the condition of the
charger or the battery.
English
(without dust extraction unit)
Plugged into power
source
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Malfunction in the battery
or the charger