Dolmar AS-3726 Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 70
ENGLISH
(Original instructions)
1
Red indicator
2
Button
3
Battery cartridge
4
Star marking
5
Battery indicator
6
Lock-off button
7
Switch trigger
8
Front hand guard
9
Lock
10 Unlock
11 Adjusting screw
12 Sprocket cover
13 Lever
14 Adjusting dial
SPECIFICATIONS
Model
Standard guide bar
Standard saw chain
Sprocket
Overall length (without guide bar)
Net weight
Chain speed per minute
Chain oil tank volume
Rated voltage
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
*1 Weight, with largest battery cartridge, without guide
bar and chain, empty oil tank, according to EN ISO
11681-2.
*2 Weight, with battery cartridge, guide bar, and chain,
filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide
bar and saw chain. Otherwise personal injury may result.
Explanation of general view
15 Sprocket
16 Adjusting pin
17 Hole
18 Guide bar
19 Loosen
20 Tighten
21 Saw chain
22 Oil tank cap
23 Oil inspection window
(for refilling the tank with oil)
24 Oil inspection window
25 Spike bumper
26 Felling area
27 Felling direction
Guide bar length
Cutting length
Sprocket nose
Type
Type
492 (91PX)
Pitch
9.5 mm (3/8")
Gauge
1.3 mm (0.05")
No. of drive links
Number of teeth
Pitch
9.5 mm (3/8")
*1
*2
AS-3726
250 mm
23 cm
24 cm
Carving bar
bar
25 (25AP)
6.35 mm (1/4")
1.3 mm (0.05")
40
60
6
9
6.35 mm (1/4")
4.6 kg
8.3 m/s (500 m/min)
D.C. 36 V
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
28 Danger zone
29 Escape route
30 Guide bar cover
31 Battery cover
32 Cutting length
33 Distance between cutting edge
and depth gauge
34 Minimum 3 mm
35 Side plate angle
36 Slotted screwdriver
37 Locking ring
38 Limit mark
39 Brush holder cap
40 Screwdriver
AS-3731
300 mm
28 cm
Sprocket nose bar
291 (90PX)
9.5 mm (3/8")
1.1 mm (0.043")
46
6
9.5 mm (3/8")
316 mm
4.1 kg
4.7 kg
3
85 cm
D.C. 36 V
• Read instruction manual.
• Wear eye protection.
• Wear ear protection.
• Wear a helmet, goggles and ear
protection.
END313-1
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

As-3731

Tabla de contenido