SmartGyro Xtreme Seat Manual De Usuario página 8

EN
Xtreme Seat - Manual
Step 2
When the saddle is mount, we should put it on the electric skate
We place the saddle support on the basis of the SmartGroup Xtreme at the height we
5
consider optimal for us. Then we turn the levers tightening to the maximum and finally
we turn and close the two hooks so that the grip is total.
Once we have checked that the saddle is firmly fixed to the base of the saddle, we
must adjust the height of the saddle to the height of the user.
It is important that you check weekly that the entire structure is fixed and firmly
attached to the skate support to avoid any possible fall or problem.
Youalready have your skate turned into an electric "pseudo-bike".
You can move the leg slightly
goat of his Xtreme to place the
Saddle further back.
7
smartgyro.es