Desoutter SSB060-T750-S4Q Instrucciones De Uso página 4

Battery pack
(Not included in
standard
equipment.)
Battery pack
reception
Removing the
battery pack
Switching
between forward
and reverse
rotation
Switching the
machine on and
off
ENGLISH
Fully charge new or long stored battery packs before using your battery tool. Battery
packs only reach full capacity after 4 – 5 chargings.
The battery pack can be inserted either
way into the holding device:
From the front:
The shape of the machine is more
compact and therefore well suited for
working in restricted space.
From the back:
Due to the optimum weight distribution the
machine is ideally balanced. This protects
the wrist when driving screws or drilling
horizontally.
Insert the battery pack until the clamps
engage.
Press together the clamps and remove the
battery pack in direction of arrow.
Select direction of rotation with reversing
lever.
Due to a lockout mechanism, the reversing
lever can only be switched when the
On-/off switch is not depressed.
When the reversing lever is in the middle
position it is not possible to switch the
machine on (lockout mechanism).
Switching on: Press on-off switch
Switching off: Release on-off switch
When the On/Off switch is depressed, the
machine will start smoothly. This makes it
easier to apply the bit to the screw. Keep
the switch depressed until the machine has
finished the tightening process – indicated
with an audible
control light. The work spindle is
automatically slowed down when the
cut–off moment has been reached (no
after–beating).
3
lick" and the green
L T
1 2 V O
h
2 0 .4 W
1 .7 A h
1 2 V O
1 .7 A h
SSB060–T750–S4Q, SSB120–T360–S4Q
L T
1 2 V O
h
1 6 .8 W
h
1 . 4 A
L T
h
2 0 .4 W