Tabla de contenido
Publicidad
English
Problem
not receive a sig
nal from a con
nected remote
control
A previously suc
cessfully con
nected battery
pack is no longer
able to control
42
Possible causes
mobile dust extractor no
longer match.
The mobile dust extractor
was switched on using the
battery pack and switched
off using the remote con
trol. The switch-off signal
from the remote control
Remedy
Hold down the connection
button [1-1] and the MAN
button [1-3] on the remote
control for 10 seconds.
The LED indicator flashes
purple if the reset has been
successful. The remote
control can be connected to
the mobile dust extractor
again (see chapter
mote control)
Connecting the battery
pack to the mobile dust ex
tractor
See chapter
6.3
6.2
Re
Publicidad
Tabla de contenido
