Attaching And Detaching The Receiver - Canon GP-E1 Manual De Instrucciones

Attaching and Detaching the Receiver

Turn off the camera before attaching the receiver. The receiver is
powered by the camera.
Detaching
Turn off the camera.
Loosen the tightening screw until it spins freely.
Pull the terminal out of the camera.
Always make sure to turn the camera off before attaching or detaching the
receiver.
8
Open the terminal cover on the
1
camera.
Pull out the extension system
terminal cover and rotate it toward the
front.
Attach the receiver.
2
Align the receiver terminal and
attachment pin with the
corresponding camera terminal and
hole.
Push the terminal firmly into the
camera.
As you push the terminal into the
camera with your left index finger,
attach the receiver securely by
turning the tightening screw until it
stops rotating.