BordBar TB08
• If the cooler is connected to the AC socket: disconnect the refrigerator
and other electric consumers from the battery before connecting the
quick charging device.
• If the cooler is connected to the DC socket: disconnect the refrigerator
or switch it off when you turn off the engine. Otherwise you may dis-
charge the battery.
• The cooling device is not suitable for transporting substances which
are caustic or contain solvents.
2.2
Operating the cooler safely
D
DANGER!
• Do not touch exposed cables with your bare hands. This applies
especially when operating the device from the AC mains.
!
CAUTION!
• Before starting the device, ensure that the power supply line and the
plug are dry.
A
NOTICE!
• Do not use electrical devices inside the cooler unless they are
recommended by the manufacturer for that purpose.
• Do not place the cooling appliance near naked flames or other heat
sources (heaters, direct sunlight, gas ovens etc.).
• Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Make sure that the cooling appliance is
sufficiently far away from walls and other objects so that the air can
circulate.
• Ensure that the ventilation openings are not covered.
• Do not fill the inner container with ice or fluid.
• Never immerse the cooling appliance in water.
• Protect the cooling appliance and the cable against heat and
moisture.
EN
Safety instructions
9