Safety instructions
2
Safety instructions
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences and incorrect connection voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
Note the following basic safety information when using electrical devices to protect against:
• Electric shock
• Fire hazards
• Injuries
!
WARNING!
• Electrical devices are not children's toys!
Always keep and use the device out of the reach of children.
• This device can be used by children aged 8 years or over, as well as by persons with
diminished physical, sensory or mental capacities or a lack of experience and know-
ledge, providing they are supervised, or have been taught how to use the device
safely and are aware of the resulting risks.
• Only use the device as intended.
• Lay the cables so that they cannot be damaged by the doors or the bonnet. Crushed
cables can lead to serious injury.
!
CAUTION!
• Lay the cables so that they cannot be tripped over or damaged.
• Do not operate the device:
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In areas where there is a danger of explosions
• Always disconnect the power supply when working on the device.
• Please observe that parts of the device may still conduct voltage even if the fuse has
blown.
• Do not disconnect any cables when the device is still in use.
A
NOTICE!
• Use ductwork or cable ducts if it is necessary to lay cables through metal panels or
other panels with sharp edges.
• Do not lay the cable so that it is loose or heavily kinked.
• Fasten the cables securely.
• Do not pull on the cables.
8
DSP-EM
EN