Security Code; Touch Sensor Tone; Manual Clock Adjustment; Clock Display - Kenwood Ez900HDS Manual De Instrucciones

Menu system
In Standby mode

Security Code

Because authorization by the Security Code is
required when it's removed from the vehicle,
personalizing this unit is by using the Security
Code is a help in preventing theft.
• When the Security Code function is activated, the code
can't be changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number
of your choice.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3
Enter Security Code mode
Press the [MENU] button.
When "ENTER" is displayed, "CODE" is displayed.
4
Select the digits to enter
Press the [AUDIO] knob.
• This function can be used the [FM] / [AM] button.
5
Select the Security Code numbers
Turn the [4] / [¢] knob.
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the [AUDIO] knob for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is
displayed.
8
Do the step 4 through 7 operation, and
reenter the Security Code.
"APPROVED" is displayed.
The Security Code function activates.
• When the wrong Code is entered in steps 4 through 6,
repeat from step 4.
28 |
English
Press the Reset button and when it's removed
from the battery power source
1
Turn the power ON.
2
Do the step 4 through 7 operation, and enter
the Security Code.
"APPROVED" is displayed.
The unit can be used.

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON or OFF.
Display Setting
"Beep ON" Beep is heard.
"Beep OFF" Beep canceled.

Manual Clock Adjustment

1
Select Clock Adjustment mode
Press the [AUDIO] knob.
Select the "Clock Adjust" display.
• This function can be used the [FM] / [AM] button.
2
Enter Clock Adjust mode
Press the [MENU] button.
The time indicator (hours) is blinks.
3
Select the item (hours or minutes)
Press the [AUDIO] knob.
• This function can be used the [FM] / [AM] button.
4
Adjust the hours or minutes
Turn the [4] / [¢] knob.
5
Exit Clock adjustment mode
Press the [MENU] button.

Clock Display

Setting the clock display ON or OFF.
Display Setting
"Clock ON" The clock are displayed.
"Clock OFF" The clock aren't displayed.