Cleaning And Maintenance - nedis WIFISM10WT Guia De Inicio Rapido

WIFISM10WT
Smart motion detector
Description
1. Reset button
2. Status indicator
3. USB port (Micro USB)
Use
1. Download and install the app "Nedis SmartLife" from
Apple App Store or Google Play Store on your mobile
device.
2. Launch the app "Nedis SmartLife".
3. Create a new account or log in to your existing
account.
4. Tap "+" to add the device.
5. Select "Other products" from the list of products.
6. Take one of these actions:
(a) Use the USB cable to connect the power adapter
to the device. Insert the mains plug of the power
adapter into the wall socket.
(b) Open the battery compartment by turning the
back of the smart motion detector counterclockwise.
Install the batteries (2x CR123A, not included) into
the battery compartment. Close the battery
compartment.
7. If the status indicator does not flash: Press and hold
the reset button for 6 seconds.
If the status indicator flashes: Confirm in the app.
8. Confrm the Wi-Fi network and password.
9. Enter the device name.
Note: The device name will also be used by Amazon
Alexa and Google Home.
10. Mount the bracket to the required location.
11. Place the mart motion detector into the mounting
bracket.
12. If necessary, adjust the detector angle.
Safety
• To reduce risk of electric shock, this product should
only be opened by an authorized technician when
service is required.
• Disconnect the product from the mains and other
equipment if a problem should occur.
• Read the manual carefully before use. Keep the
manual for future reference.
• Only use the device for its intended purposes.
Do not use the device for other purposes than
described in the manual.
• Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
• The device is suitable for indoor use only.
Do not use the device outdoors.
• Do not expose the product to water or moisture.

Cleaning and maintenance

Warning!
• Do not use cleaning solvents or abrasives.
• Do not clean the inside of the device.
• Do not attempt to repair the device. If the device
does not operate correctly, replace it with a new
device.
• Clean the outside of the device using a soft, damp
cloth.
Support
If you need further help or have comments or
suggestions please visit www.nedis.com/support
3
English