Battery Replacement; Weight Measurement; Automatic Switching Off - ECG OV 127 Glass Manual De Instrucciones

Battery replacement

WEIGHT MEASUREMENT

GB

Automatic switching off

Switching between the measurement units
You can switch between the measurement units (kilograms/pounds/pounds stones) following way:
1. Locate the switch on the bottom of the scale.
2. When the scale is switched off, press the button for switching between the units. The LCD display shows
which unit was just used. Change the unit by pressing the button again.
20
20 20
1. Open the cover of the battery compartment on the bottom of the scale.
2. Gently push the battery and it will pop out.
3. When you insert the new battery, first place the positive contact on one
side of the battery and then push the other side. Make sure the polarity
is correct.
1. In order to achieve accurate results, the scale should be placed on a flat,
hard and stable surface and placing it on a carpet or other soft surfaces
should be avoided. Ensure before weighing that there is no foreign
object under the scale.
2. Step carefully on the scale – the scale switches on automatically. Stand
evenly on the scale, do not move and wait until the weight indicator on
the display stabilizes.
Attention:
The glass surface becomes slippery when wet. Keep dry!
The device automatically turns off when you step off the scale. The automatic
shutdown occurs in the event that the display shows "0.0" or when it shows
the same weight for about 8 seconds.