Troubleshooting; Technical Specifications; Meaning Of The "Wheelie Bin" Symbol - Clatronic MWG 775 H Instrucciones De Servicio

Ocultar thumbs Ver también para MWG 775 H:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 36
• Use a damp cloth to wipe the viewing window inside and
outside, and regularly remove splashing and spots caused by
spilled liquids.
Exterior
• Clean the exterior walls of the enclosure with a damp cloth only.
Make sure no water enters the openings in the enclosure and
therefore the inside of the device.
• Use a damp cloth to clean the switches. When cleaning the
function switches, first open the door in order to avoid acciden-
tally switching on the device.
Accessories
• Clean the glass tray occasionally with dish detergent or in the
dishwasher.
• Regularly clean the guide ring and the inside of the bottom. You
may remove the guide ring and manually clean it. Use a mild
detergent or glass cleaner. Dry thoroughly. Make sure to position
the ring properly afterwards.
Odor
• In order to remove unpleasant odor in the microwave, place
a bowl suitable for microwave use filled with water and lemon
juice in the device and heat for approx. 5 minutes. Then wipe the
oven with a soft cloth.
Oven lights
• Please contact a service center for replacing the oven lights.

Troubleshooting

Malfunctions are often just caused due to minor problems. Before
contacting our customer service, please check the table below:
Problem
Possible cause
Radio or TV
The electromagnetic
reception is
fields of this device
interrupted dur-
might interfere with the
ing microwave
pictures and sound of
operation.
special frequencies.
The device is
Defect wall socket.
not supplied with
electricity; the
display is black.
The display
There was a power
shows "0:00"
failure.
The device does
The door is not prop-
not start opera-
erly closed.
tion. The display
shows a readout
The START/+30SEC./
other than the
CONFIRM button
current time.
was not pressed after
selecting the function.
74
All controls are
locked.
The turn-
table causes a
scratching or
abradant noise.
The operation is
terminated with-
out any obvious
reason.
Model:. ..............................................................................MWG 775 H
Power supply: ..................................................................230 V, 50 Hz
Power consumption:
Microwave: ............................................................................... 1300 W
Grill: .......................................................................................... 1200 W
Convection: .............................................................................. 1200 W
Rated microwave power output: .............................. 800W/2450 MHz
Cooking chamber capacity: ................................................... 23 liters
Protection class: ................................................................................. I
Net weight: ...............................................................................14.5 kg
This device complies with all current CE directives, such as elec-
tromagnetic compatibility and low voltage directive and is manufac-
Notes/ solution
tured according to the latest safety regulations.
This is normal and not
a malfunction. Position
the devices further away
from each other.
-
Try another wall
socket.
-
Check the main fuse in
Take care of our environment, do not dispose of electrical appli-
your household.
cances via the household waste.
Set the clock again.
Dispose of obsolete or defective electrical appliances via municipal
Check if there are
collection points.
objects or food remains
jammed in the door.
Please help to avoid potential environmental and health impacts
Press the
through improper waste disposal.
START/+30SEC./
CONFIRM button,
You contribute to recycling and other forms of utilization of old
or press the STOP/
electric and electronic appliances.
CLEAR-CLOCK button
to terminate the process.
Your municipality provides you with information about collecting
points.
Problem
Possible cause
The child-proof lock is
activated.
There are dirt or
foreign objects in the
area of the turntable
shaft.
The device is defect.

Technical specifications

Subject to changes without prior notice!

Meaning of the "Wheelie Bin" Symbol

Notes/ solution
Press the STOP/
CLEAR/CLOCK
button and the
START/+30SEC./CON-
FIRM button simultane-
ously to unlock.
Remove possible ob-
jects and food remains
as described under
"Cleaning".
Please contact our
customer service.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido