Comelit AHDVR040x Guía Rápida página 28

IP address： the IP address must be unique and cannot be in conflict with the host or work station
the same network segment.
Subnet Mask：use for distinguish the network segment.
Gateway：need to set the gateway address to achieve communication between the different network
segments.
MAC address：device's MAC address
Web port：this port number is used for IE browser visit; default port is "80".
Preferred DNS：preferred DND IP address.
DDNS: The automatic analytic function of dynamic domain name, it could supported Comelit DNS, etc. To
use Comelit DNS see the last page of this manual.
In the "network setup" menu, click " DDNS " to enter it's setup interface
Enable："☑"means DDNS service start using ;"□"means stop using.
Select the corresponding network server and input user name, password and domain name
After the page setup is completed, click '"OK " to save the changes and exit ; click "cancel ", to exit the setting.
1. Connect DVR with network, make sure network working fine
2. For remote view in computer, go to
Do the following setup before you log in Esee on computer
Note: Internet Explorer setting. If use it for the first time and the software can't load, then need to make
the following setting: Internet options
all for opening, click ok.
4. Go to www.dvrskype.com
and password is same with DVR user name and password
Note: the default user name is admin, no password
Esee User Manual
www.dvrskype.com
Safety-Internet
or www.e-seenet.com,input Esee ID, user name and password, this user name
or www.e-seenet.com
Custom options
27
which on
pick Active X and plugin