Trotec BO20 Manual De Instrucciones página 13

wered on/off using the on/off key 5 once the char-
ging cycle has begun via the USB port 8. Press
and hold the mode key 6 to enter "stand-by mode".
Image rotation and image setting
• Image rotation: Press the mode key 6, briefly in
this setting to rotate the image by 90°.
• Image settings: Power up the unit 5. Keep the
mode key pressed 6 for approx.. 2 seconds to get
to the image setting mode. Settings including
brightness, contrast, definition, colour temperature,
language and other important functions can be
changed here.
• Keep the mode key 6 pressed for approx. 2 se-
conds to get to the menu item "Image Settings".
G
Press either the "+"4 or the"- "3 briefly or for a
longer period to get from one menu item to another.
The cursor will either move upwards or wards de-
pending on which key (+ / - ) you press until you have
reached the menu item which you wish to change.
Confirm your selection by briefly pressing the mode
key 6.
• When you have reached your previously selected
menu item, you can scroll through the menu items
on the next level with the cursor by pressing the
"+" key 4 or the "- "key 3 briefly or by keeping
them pressed over a longer period. Press the mode
key 6 briefly to save the setting.
To reach the next menu level move the cursor until
you reach the menu item "Exit" and press the mode
Bildansicht
key 6. The settings you have selected have now
Bildansicht
been saved.
• The image format is factory set to PAL.
Adjusting the brightness of the backlit display
• The standard brightness value is 3. This value is
presented at the top of the display.
• Press the "- "3 key briefly to dim the LED illumi-
nation. The value 0 appears on the display when the
background illumination is switched off.
• Press the "+"4 key briefly to increase the LED illu-
mination. 5 is the highest value. The background il-
lumination is at its brightest in this setting.
Operating manual – Mini-Videoscope
B - 5