Rotaid PLUS Manual De Instrucciones página 4

ROTAID PLUS
Installation manual
1. Determine the location
where you wish to mount the
Rotaid. Make sure there are no
irregularities present at the desired
location. Please take the fire safety
and evacuation regulations into
account. If mounted on a stone or
concrete wall, please use the wall
anchors prior to fixation.
2. Mark the 4 holes for drilling
and use the screws and rings for
fixation. An optional 5th mounting
position is available at the top of
the cabinet.
pag. 4 Rotaid - Plus
3. Use an Allen key (5mm) to
firmly attach the nylon belt to the
back plate.
4. After attaching the cover and
belt, now please use both long
bolts to find the perfect position
for your AED.
Please make sure the bolts are
firmly screwed into the block.
5. You can now place the AED into
the cabinet by using its handle or
carrying case handle.
Please rotate the cover on the
back plate by starting slightly
counterwise and rotate to the right
until the cover reaches the stop.
When correctly placed, the hook
on the bottom of the cabinet falls
through the cover.
Your Rotaid Plus is now ready
for use!