5. Follow your iPod/iPhone manual for further use of the
controls.
CAUTION:
Return to radio mode before disconnecting your iPod/
iPhone from this device to avoid damages to your iPod/
iPhone.
NOTE
If you have an incoming call when playing back music
with the iPhone docked, then playback stops and you
can hear the ring tone.
Description of iPod/iPhone Controls
(2 on RC)
You can pause and continue music playback. Press again
to continue playback.
(12 on RC)
Press 1 x =
Restart of the song from the beginning.
Press 2 x =
Skip to the previous song.
Press 3 x =
Skip to the song before the previous song,
etc. Press and hold during playback to
search in reverse through the song.
(12 on RC)
Press to skip to the next song and the following songs.
Press and hold during playback to search forward through
the song.
MENU (1 on RC)
Press this button to bring up the iPod/iPhone Menu or to
return to the previous menu.
ENTER (11 on RC)
Press this button to activate a function or to display the
next menu..
/ (3/5 on RC)
Press these buttons, to scroll up/down the iPod/iPhone
Menu.
iPod/iPhone Charging
Your iPod/iPhone battery is charged as soon as the iPod/
iPhone is docked. To do this, the unit must be connected
to the mains.
NOTE:
• If supplied with your iPod, plug the adapter onto the
docking port to ensure that the iPod sits correctly in
the port.
• Not all iPod/iPhone generations support the charge
mode.
NOTE:
• The duration of the charging process depends on the
iPod/iPhone which is used and its operating condi-
tion.
AUX IN Jack (Rear)
Connect analogue playback device here. Connect playback
devices such as MP3 player, CD player, etc. to listen to the
music via the speakers.
1. Connect the external device via 3.5mm stereo jack to
the AUX socket.
2. Now select AUX out mode with the AUDIO button
(12/4).
3. You will find further instructions in the manual of
your external sound source.
4. Listen to music playback from external playback
devices via the speakers. You can use the +/- volume
buttons (12 on RC) or the VOLUME control (6 on the
device) to adjust the volume.
NOTE:
Set the volume of the external device to a reasonable
level.
Cleaning
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without
detergents.
• Do not submerge the device in water.
Troubleshooting
Fault
Cause
Device does not
Device blocked,
work
it "hangs"
Technical Speciications
Model: ................................................................................SRC 4333 iP
Backup battery: .................................................2x 1,5 V, R03, AAA
Net weight: ................................................................................0,68 kg
Power Consumption: ..................................................................10 W
External power adaptor
Input: .........................................................AC 100-240 V, 50/60 Hz
Output: ..............................................................................DC 5 V / 2 A
Polarity: ..................................................................................
Protection Class:...................................................................................II
Radio
Frequency Range: ...................................FM 87,5 ~ 108 MHz
Technical modiications reserved!
ENGLISH
45
Solution
Disconnect the mains
plug for about 5 sec.
Then switch the device
back on.