You Rock Guitar® lets you record your own performances to internal memory. This
is a great tool for those times when you find inspiration but are away from your
recording system. The recording feature provides a "sketch pad" so you don't forget
great riffs or new chord progressions. Each recording is stored as part of the preset
you are playing while recording. Each preset stores a single recording, which you can
overdub or erase entirely.
To record a new track:
1. Choose a preset that you want to play while recording.
2. Choose a backing track that you want to listen to while recording. If you don't
want to use tracks 1-25 because you want to play in a different key or tempo, try
one of the "metronome" tracks (24-26).
3. Hold RECORD, press PLAY, then release RECORD.
4. While the backing track plays, play your own track. You can bend notes with
the whammy bar and even turn the GUITAR and SYNTH buttons on and off
while you play. You Rock Guitar records it all!
5. To stop recording, press RECORD.
6. To hear your recorded track, press PLAY to stop, then press PLAY again to
start playback. You hear your recorded performance.
To punch-in new notes in an existing track:
1. Press PLAY to start playback of the backing track and your own track.
2. To punch-in, press RECORD. Anything you now play will replace the existing
track's notes.
3. To punch-out, press RECORD.
When you play back the track, you will hear your original track except in the
section where you punched-in to record the new notes.,
Tips:
• Your recordings are saved in the current preset when you record them.
• To erase an existing recording. press and hold RECORD for 3 seconds
• If you reset your You Rock Guitar's operating system, your tracks are erased.
• To export your recordings, record the stereo or GUITAR audio out into a audio
recording device, or record the USB/MIDI output into a MIDI sequencer.
r
ecordinG With
y
r
t
oU
ock
racks
You Rock Guitar 1.105 User Guide
™
21