Sonnenkraft PSKR18 Manual De Instrucciones página 17

Installation on the tank
Fasten fresh water module FWM to the tank.
See separate fresh water module installation instructions.
Screw in threaded pins for station fastening on the tank.
Put on rear insulation shell of the solar station.
Install connection pipe for FWM, guide cable upward and
press into the cable ducts.
Hang station on threaded pins and fasten with nuts.
Hydraulically connect station with corrugated pipe [10]
and seals [19] to the tank.
Caution!
Counterhold when tightening the union nuts.
GB 17