Cleaning and maintenance
8.4
Switching off and storing the refrigerator
If you do not intend to use the refrigerator for a long time, proceed as follows:
➤ Press the on/off button until the refrigerator switches off.
➤ Disconnect the connection cable from the battery or disconnect the plug
on the AC cable plug from the rectifier.
➤ Clean the refrigerator (see chapter "Cleaning and maintenance" on
page 52).
➤ Turn the locking wheel (fig. g 1, page 10) anti-clockwise to the end stop
("Vent").
➤ Close the door until it latches in.
✓ The door stays open thus preventing smells from arising.
8.5
Change the fuse
If the fuse in the AC socket is faulty, it can be replaced.
➤ Lever the fuse compartment (fig. f 2, page 9) open with a screwdriver.
➤ Replace the fuse (250 V/4 A).
➤ Close the fuse compartment again.
9
Cleaning and maintenance
A
NOTICE!
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the refrigerator.
Do not use hard or pointed tools to speed up the defrosting
process.
➤ Clean the refrigerator regularly and as soon as it becomes dirty with a
damp cloth.
➤ Make sure that no water drips into the seals. This can damage the
electronics.
➤ Wipe the refrigerator dry with a cloth after cleaning.
➤ Clean dust and dirt from the condenser at regular intervals.
52
CoolMatic
EN