Publicidad
Idiomas disponibles
Idiomas disponibles
SYMBOLS
Operation manual must be reviewed.
Never dispose of electrical equipment together with household waste.
This machine complies with the CE declarations.
CE
Attention! Hot surface may cause burns.
PLEASE NOTE!
Drawings in this manual are for illustration purposes only and in some details may differ from the actual
machine.
The original operation manual is in German. Other language versions are translations from German.
USER MANUAL
I. SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid injury from fire or electric shock, please ensure the compliance with the safety instructions when
using this device. Please read the instructions carefully and make sure that you have understood them well.
Please keep the manual near the equipment to be able to read it at any time. Always use current sources
connected to the ground that also provides the necessary voltage (indicated on the label on the device). If
you have any doubt, let an electrician check that your outlet is properly grounded. Never use a damaged
power cable. Do not open the unit in a damp or wet environment, or if your hands or body are damp or wet.
Protect the unit from solar radiation. Use the device in a protected place to avoid damaging the equipment
or putting at risk others. Make sure the device is able to cool and avoid placing it too close to other devices
that produce heat. Before cleaning, disconnect it from the power source. Use a soft damp cloth for cleaning.
Avoid using detergents and make sure that no liquid enters the unit. No internal element of this device needs
to be maintained by the user. Opening the device without our approval leads to a loss of warranty!
II. GENERAL SAFETY INFORMATION FOR THE USE OF OUR ELECTRIC FRYERS
•
The user manual should be kept close to the device and should always be accessible for the users.
Inform your employees how to use the device properly.
•
Make sure the hot air can circulate well and place the device at a distance of more than 10 cm from
walls and other electrical device, as well as there should be adequate ventilation in the working area.
•
Do not place the device near to combustible materials.
•
During initial use of the device, the heating element may produce a light smoke. This is absolutely
normal. Simply ensure that the smoke can evaporate and that a good aeration is provided.
•
Some parts of the device can get extremely hot. To avoid any injuries, be careful whenever you come
into contact with the device.
•
The meals, which are heated with the device, can become very hot. Do not forget to use protections
(cooking gloves).
•
Always check that the oil level is between the two marks which are indicated on the side of the tank.
•
Never fill the basket with clamp/wet food. This produces foam and can lead to an overflow of oil.
•
Clean the device regularly to avoid permanent accumulation of dirt.
8
III. TECHNICAL DETAILS
Product name
Model
Nr art.
Voltage [V] / Frequency [Hz]
Power [W]
Temperature range [oC]
Operation frequency [kHz]
Dimensions (L.xW.xH.) [mm]
Capacity [L]
Weight [kg]
IV. SCOPE OF THE APPLICATION
This induction deep fryer is intended exclusively to deep-fry food.
Never use the deep fryer to:
•
heat other products,
•
heat liquids containing sugar, sweetener, acids, alkalis or alcohol;
•
warm up or heat liquids that are inflammable, harmful for health, volatile or with similar attributes or
other substances.
Any damage resulting from a non-conform use of the device is to be paid by the user!
V. BERORE THE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
VI. DISPOSING OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition!
VII. DEVICE INSTALLING
Placing the device
The work surface where the device will be located must be suitable for the size of the appliance, please refer
to the measurements. The work surface must be levelled and dry and should have a suitable height from the
ground to enable proper use of the device. The environmental humidity should not exceed 85%. The power
cord connected with the appliance must be reliably grounded and should correspond to the technical details.
VIII. MACHINE OPERATION - BASICS
RCIF-10EB | RCIF-10DB
Rev. 01.02.2017
Rev. 01.02.2017
RCIF-10EB
1145
3500
60-190
18-30
288x440x414
10
12.3
1
2
3
4
Induction Fryer
RCIF-10DB
1343
230~ / 50
2 x 3500
60-190
18-30
578x440x414
2x10
23.05
1
Device description
3
1.
Control panel
2.
Cover
3.
Basket
4
4.
Oil drain tap
9
Publicidad
