HEADRUSH LOOPERBOARD Guia De Inicio Rapido página 3

Features
Top Panel
6 7
2
5
4
5
4
1. Touchscreen: This full-color multi-touch display shows information relevant to the
Looperboard's current operation. Touch the display (and use the hardware controls) to control
the interface. See
2. Encoder: Turn this encoder to scroll through the available menu options or adjust the parameter
values of the selected field in the display. Push the encoder to confirm your selection.
3. Input Gain: Turn these knobs to adjust the independent gain level of each input.
4. Footswitches: Use these footswitches to perform different functions. The eight right-most
footswitches correspond to the four tracks of a loop. See the
how to use them.
5. Footswitch Indicators: These lights indicate the status of different functions (performed by the
footswitch below each one). See the
6. Master: Turn this knob to adjust the volume level of the outputs.
7. Phones: Turn this knob to adjust the volume level of the Phones output.
8. Aux: Turn this knob to adjust the volume level of the Aux input.
Important: The audio signal from the Aux input is routed directly to the outputs. It is also
unaffected by the master volume or phones volume knobs.
8
5 5
4 4
5 5
4 4
Basic Operation > Overview
Basic Operation
1
5
4
5
4
to learn how it works.
Basic Operation
chapter to learn about them.
3 3 3
5 5
4 4
5 5
4 4
chapter to learn
3
3