Mvac M20 Manual De Instrucciones página 12

MAINTENANCE
USE WITHOUT BAG
- FOR VERTICAL INSTALLATION ONLY
We recommend you empty and clean the
filter at least each season, depending on use
of your central vacuum.
1. Disconnect the unit from power source.
2. Remove the flexible hose from unit lid
adaptor (figure 8).
3. Unlatch the two clips and remove lid
(figure 9).
4. Remove filter and empty (figure 10).
5. To clean filter, wash by hand in warm soapy
water. Rinse well. Allow to dry completely
before replacing in unit. Do not machine
wash or dry.
6. Replace filter. Ensure that the filter seal is
well inserted on the unit rim (figure 11).
7. Replace unit lid and seal by latching both
clips.
8. Replace the flexible hose to unit lid adaptor.
9. Reconnect unit to power source.
12
Maintenance
figure 8
figure 9
figure 10
figure 11