A&D TM-2430 Manual De Instrucciones página 19

Steps for automatic measurement
ex. First block
Second block
Third block
Step 1 Press and hold the
The current mode is displayed.
Step 2 Press the
mode III.
Step 3 Press the
start time of the first block is displayed.
Step 4 Press the
as the start time of the first block.
Step 5 Press the
block is displayed.
Step 6 Press the
minutes as the frequency for the first block.
Step 7 Press the
second block is displayed.
Step 8 Press the
hours as the start time for the second block.
Step 9 Press the
second block is displayed.
Step10 Press the
as the frequency of the second block.
Step11 Press the
block is displayed.
Step12 Press the
as the start time of the third block.
Initializing the recorder
08:00 ~ 21:59
22:00 ~ 05:59
06:00 ~ 07:59
START STOP
AUTO ON/OFF key so as to display
START STOP key. The mode is stored and the current
AUTO ON/OFF key so as to display "8" for 8:00 hours
START STOP
key. The current frequency for the first
AUTO ON/OFF
key so as to display "30" for 30
START STOP key. The current start time of the
AUTO ON/OFF key so as to display "22" for 22:00
START STOP key. The current frequency for the
AUTO ON/OFF
key so as to display " " for 60 minutes
START STOP
key. The current start time of the third
AUTO ON/OFF key so as to display "6" for 6:00 hours
Page 17
frequency is 30 minutes
frequency is 60 minutes
frequency is 10 minutes
key for approx. 3 seconds.
Selection for the Automatic Measurement
START STOP
for
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
START STOP
AUTO ON/OFF
To next page