Cleaning And Maintenance; Technical Specifications - Clatronic HSM/R 3313 Instrucciones De Servicio

Charging the Unit
• Turn the unit off.
• Connect the power adaptor connector with one
of the following jacks.
▪ The socket directly at the bottom end of the
unit.
▪ Alternatively place the unit in the charging
station. The socket is at the rear.
• Plug the power adaptor into a 230V/50Hz wall
outlet.
• The charge indicator turns on during charging.
Note:
The charge indicator does not indicate the
state of charge of the rechargeable battery.
• Charge the unit before first use for 10 hours.
• Later charges take 10 hours as well.
Note:
The unit cannot be operated with mains power.
Caution:
After 10 hours always disconnect from mains
power supply.
Note Lifetime Rechargeable Battery
You can extent the lifetime of the rechargeable
battery by following these steps:
► Only charge after the battery is nearly
exhausted.
► Do not charge for more than 10 hours.
► Charge the unit at temperatures between
0° and + 40°C.
Clip and Cut Beard
• Select the cutting length with the attachment
comb. Press and slide the button (3).
• Slide the switch (4) towards the clipper head:
Start with the longest cutting stage and clip
goatee, sideburns or full beard step by step to
the desired length.
Clip Hair
• Select the cutting length with the attachment
comb. Press and slide the button (3).
• Slide the switch (4) towards the clipper head:
Start with the longest cutting stage and clip
your hair step by step to the desired length.
Outlining and Shaving the Neck
• Remove the attachment comb (1) and slide the
switch (4) towards the clipper head.
HSM-R 3313 final script.indd 27
• The clipper head allows precise outlining the
shape of the beard, even in difficult to reach
places as well as a clean shaving of the hair-
line at the neck.
Finish Operation
Slide the switch (4) down.

Cleaning and Maintenance

• Regular cleaning and maintenance ensures
optimum results and long lifetime.
• Turn the unit off and disconnect from mains
power supply, if necessary.
Warning:
► Do not submerge the unit in water.
Caution:
► Do not use a wire brush or other abrasives.
► Do not use sharp or abrasive cleaning
agents.
• Use the cleaning brush to remove remaining
hair after use.
• Remove the attachment comb (1).
• Press the two buttons (2) at the rear of the unit
to fold out the clipper head.
• Regularly apply 1 - 2 drops acid-free oil to the
clipper head.
• Fold the clipper head back after cleaning until
it locks in place.
• Clean the casing with a slightly damp cloth, if
necessary.
• Replace the attachment comb.
Noise emission
The workplace-related emission value is less
than 70 dB(A).

Technical Specifications

Model: .............................................HSM/R 3313
Power supply adaptor: ...............230V, 50Hz, 3 W
Output power adaptor: ...............DC 4.5V, 150mA
Protection class power adaptor: ........................ ΙI
Rechargeable battery: ...................1.2V, 800mAh
Run time: ................................... max. 35 minutes
Charging time battery: ........................... 10 hours
Net weight: .............................................0.140 kg
Subject to change without prior notice!
7
2009-4-22 17:18:41