Technical Data - McCulloch Li 58T Manual De Usuario

LED screen
RED LED comes on, LED 2
is green and flashes during
charging or when the battery
pack is in the battery charger
RED LED flashes and LED 2
flashes green when the bat-
tery pack is installed.
Motor specifications
Motor type
Motor voltage
Motor power
Battery and charger specifications
Default battery pack type
Battery charger type
Noise and vibration data
Equivalent vibration level (ahv, eq) front handle.
See Note 1.
Equivalent vibration level (ahv, eq) rear handle.
See Note 1.
Sound power level, guaranteed (LWA). See Note
2.
Sound power level, measured. See Note 2.
Sound pressure level at operator's ear. See Note
3.
Product dimensions
Weight
Cutting width
Note 1: Reported data for equivalent vibration level has
a typical statistical dispersion (standard deviation) of 1.5
2
m/s .
455 - 003 - 20.11.2017
Possible faults
Internal battery tempa-
ture is too low or too
high for charging
Internal battery tempera-
ture is too low or too
high

TECHNICAL DATA

unit
V (DC)
W
m/s
m/s
dB(A)
dB(A)
dB(A)
kg (lb)
cm (in)
Possible steps
Move the battery charger and battery pack to a location
where the internal temperature of the battery pack can be
between 5°C (41°F) and 45°C (113°F).
The internal temperature in the battery must be between
-15°C (5°F) and 70°C (158°F). The environment tempera-
ture in the battery pack is too low or too high.
• If the battery pack is too cold from the ambient envi-
ronment, move the battery pack and battery charger to
a warm environment.
• If the battery pack is too hot, especially after operation,
move the battery pack and battery charger away from
the hot environment.
Li 58T (BLT58VPR)
Brushless
58
750
Li 582.6A
Li 58V 2.5CGR
2
1.930
2
1.707
96
91
80
3.5 (7.5)
38 (15)
Note 2: Noise emissions in the environment measured
as sound power (LWA) in conformity with EC directive
2000/14/ EC. Reported sound power level for the
13