4.3. REASONABLY FORESEEABLE MISUSE
Do not use the centring vice for turning work.
Do not mount components not in accordance with the specification.
Do not make any unauthorised changes or modifications.
Do not use in potentially explosive atmospheres.
4.4. PERSONAL PROTECTIVE EQUIPMENT
Comply with the national and regional regulations for safety and accident prevention. Select and
provide protective work wear such as safety shoes and safety gloves appropriate for the risks asso-
ciated with the intended activities.
4.5. DUTIES OF OPERATING COMPANY
The operating company must ensure that personnel who work on the product comply with the
regulations and provisions together with the following instructions:
National and regional regulations for safety, accident prevention and environmental protection
regulations.
No damaged products are assembled, installed or commissioned.
The necessary protective equipment is provided.
Have been instructed and trained in the use of the centring vice.
Set up and operate the centring vice only where there is adequate lighting.
4.6. QUALIFICATIONS OF PERSONNEL
Ensure that all the work listed below is performed only by qualified specialists:
Trained person
Specialist mechanical fitter
Activity
Operation
Checking for clashes
Rectifying clashes
Aligning, setting up
Maintenance
Decommissioning
Tab. 1: Legend: (x) permitted (-) not permitted
Persons who have been instructed in accord-
ance with this instructions for use and trained
on the use of the device.
Persons who are qualified / have been trained
in the field of mechanical fitting as specified in
the nationally applicable regulations.
Trained person
x
-
-
-
-
-
www.hoffmann-group.com
Specialist mechanical fitter
x
x
x
x
x
x
en
19