Electromagnetic Fields (Emf); Optimising The Lifetime Of The Battery - Philips QC5050/01 Manual Del Usuario

- Use, charge and store the appliance at a temperature between 15°C
and 35°C.
- This appliance is suitable for mains voltages from 220 to 240 volts.
- Do not use a damaged adapter.
- Do not use the appliance when one of the attachments is damaged
or broken as this may cause injury.
- Only use the adapter supplied.
- This appliance is only intended for clipping human scalp hair. Do not
use it for another purpose.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding
electromagnetic fields (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Charging (QC5050 only)
Charge the appliance for 8 hours (NiCd battery) or 12 hours (NiMh
battery) before you start using it for the first time.
A fully charged appliance has a cordless clipping time of up to 35 minutes
(NiCd battery) or 50 minutes (NiMh battery).
Do not charge the appliance for more than  hours.
1 Make sure the appliance is switched off while charging.
 Insert the appliance plug into the appliance (Fig. ).
 Insert the adapter into the wall socket.
The charging light will go on to indicate that the appliance is
,
charging (Fig. ).
The charging light will not go out or change colour when the appliance
is fully charged.

optimising the lifetime of the battery

After the appliance has been charged for the first time, do not recharge it
between clipping sessions. Continue using it and recharge it only when
the battery is (almost) empty.
4203.000.5452.3.indd 7
English

12-03-2007 14:33:21