Erasing A Stored Phone Number; Making Calls With One-Touch Dialing - Sony IT-M704 Manual De Instrucciones

Erasing a stored phone number

1
Display the phone number you want to erase by
pressing the one-touch dial button.
2
Press (ERASE/CLEAR).
3
Press b(*) or (#)B to choose "YES", and then
press (PROGRAM).
You will hear a long confirmation beep and the
phone number is erased.

Making calls with one-touch dialing

1
Pick up the handset, or press (SPEAKERPHONE).
When you want to select the phone number stored in the
second memory of the one-touch dial button, press
(LOWER).
2
Press the desired one-touch dial button.
The phone number stored in the one-touch dial button will
be dialed.
To check the phone number before one-touch dialing
When not making a call, press the desired one-touch dial button. Each
time the button is pressed, the display shows the phone number, and
then the display goes off successively.
To check the phone number stored in the second memory of the one-
touch dial button, first press (LOWER) and then press the one-touch
dial button.
The number stored in the button appears on the display for 20 seconds.
To dial the number, pick up the handset or press
while the number is displayed.
Note
When there is no phone number stored to a one-touch dial button, "NO
DATA" appears on the display.
Tip
When the phone number of 17 digits or more has been entered, "–" is displayed
next to 15th digit and then the remaining digits are displayed after about 10
seconds.
ERASE ? YES NO
(SPEAKERPHONE)
Telephone Features 33
US