Charging The Battery Pack - Sony AC-VQL1BP Manual De Instrucciones

Charging the battery pack

For details, refer to the instruction manual of the video equipment.
Switches and settings have two systems for A system and B system. Set the switch for the
system you are using.
1 Set the charging mode change switch to "NORMAL CHARGE"
or "FULL CHARGE."
Set to "FULL CHARGE" when you need full charging the battery pack.
Set to "NORMAL CHARGE" when you want to finish until normal charging.
For details, refer to "Changing the charging mode" (p. 19).
2 Set the output change switch to "CHARGE."
For details, refer to "Attaching two or more battery packs simultaneously" (p. 20).
3 Connect an AC power cord to this unit and connect the AC
power cord to a wall outlet.
There is a beep and the display window comes on.
Notes
Securely push the power cord all the way into the wall outlet.
4 Attach the battery pack.
For detail of attachment or removing the battery pack, refer to "Attaching and removing the
battery pack" (p. 21).
5 When charging is completed, remove the battery pack.
When charging condition that is set by the charging mode change switch is completed, this
unit stops charging. When the CHARGE lamp of this unit turns off, charging has been
completed. About charging completed, refer to "Changing the charging mode" (p. 19).
Refer to "Attaching and removing the battery pack" (p. 21) to remove the battery pack.
18
-GB
3
4
2
3
To the wall outlet
1