tau EASY Manual De Uso página 10

Automation system
• Keep oiled the jointed arm's pin, the boss that works coupled
to the motor output shaft and all parts subject to wear due to
friction.
• check how the safety devices are working (pneumatic edge,
torque limiter, etc.).
Extraordinary maintenance or breaks
• If major work on mechanical and/or electromechanical parts
must be carried out, the gear motor should be removed for re-
pair in the workshop by the manufacturer's or other authorised
technicians.
EASY INSTALLATION
1 - Gearmotor
Accessories:
2- Control panel
3 - Radio receiver
4 - Aerial
5 - Flashing light
6 - Key selector
7 - Safety photocells
8 - Posts for photocells
9 - Ground-mounted gate stop in open position
10 - Electric lock
EASY 12 INSTALLATION
1 - Gearmotor
Accessories:
2- Control panel
3 - Radio receiver
4 - Aerial
5 - Flashing light
6 - Key selector
7 - Safety photocells
8 - Posts for photocells
9 - Ground-mounted gate stop in open position
10 - Electric lock
The distance between the control unit and the motor must not ex-
ceed 10 – 12 m.
10
EASY Series