SP-3048CM RECHARGEABLE SPEAKER
User's Guide
Thank you for purchasing SP-3048CM Panacom's Rechargeable Speaker.
Please read the manual carefully before operating.
I. FEATURES
-. Ultra-large magnetic circuit high-sensitivity speaker with high penetrating
power,
low-frequency
representation
-. The latest decoding chips supporting stably playback of MP3 in up to 32GM
U disk/TF card.
-. 3. 5mm AUX audio input for each connection to a wide range of sound sources.
-. Built-in high-capacity battery for consecutive playback of up to 5 hours.
-. High-sensitivity microphone with ultra-long 5m wire, adjustable reverberation,
voice and Karaoke function to present outstanding performance.
-. Battery with built-in recharging protection to present a long and stable service
life.
-. Built-in low battery and full recharging indication. Human-oriented use.
-. High-density box, drop-resistant design and belt/handle design for best
choice of mobile speaker.
-. Outputs to earphone or external sound sources.
-. With Wireless BT connection function
II.RECORDING:
1. Recording in AUX Mode:
Connect a storage device (USB/TF card) and press Mode key to enter AUX mode.
Short press Record key to start recording for a time depending on the storage capacity.
During recording, the input signal should be in proper strength as you like.
2. Recording via External Microphone:
Connect a storage device (USB/TF card) and short press RECORD key to start recording
for a time depending on the storage capacity. During recording, tune the "-ECHO+"
knob to the minimum. It is noticeable that the microphone should be located a proper
distance away from the speaker to prevent any howl-round or noise.
Notes: This product starts recording from the time as displayed on the LED screen.
shock
and
perfect
medium-/high-frequency
Pg. 3