iSi Soda Siphon Stainless Steel Modo De Empleo página 17

Preparation
NOTE: If the bottle has been out of use for a long
period of time, rinse it with warm water (max.
50°C/122°F) before use. Push the lever several
times to check the siphon's function.
1. Push the measuring tube into the bottle until
it stops.
NOTE: Never fill the bottle without the
measuring tube.
Filling
2. Hold the bottle upright and fill with cold
water until the water spills out of the
measuring tube.
NOTE: Do not try to add more water by tilting or
shaking the bottle.
NOTE: Fill the iSi Siphon with water only. Do not
add extra ingredients.
Equipment Setup
3. Insert the riser tube with gasket into the
bottle through the measuring tube.
4. Screw the head onto the bottle so that it
is straight and tighten by hand.
5. Insert 1 iSi soda charger into the charger
holder.
6. Screw the charger holder with the inserted
iSi soda charger onto the head until you can
hear that all of the charger contents have
flowed into the siphon.
WARNING The siphon is now pressurized!
7. Shake the siphon vigorously at least 5 times.
8. Unscrew the charger holder and recycle the
empty iSi soda charger.
NOTE: A slight hiss may be heard when
removing the charger holder. This is normal.
9. Screw the cap onto the threads.
9
EN