Publicidad
Siphon Instructions.
NOTE: Please observe the illustrations in the
siphon instructions!
If the water is cold when poured in and the
siphon is kept in a cool place, then the soda
water will be particularly fizzy. Keep filled
soda siphon in the refrigerator.
Preparation
NOTE: If the bottle has been out of use for a long
period of time, rinse it with warm water (max.
50°C/122°F) before use. Push the lever several
times to check the siphon's function.
1. Insert the measuring tube (2344, see
NOTE: Never fill the bottle without the
measuring tube!
Filling
2. Hold the bottle upright and fill with cold
NOTE: Do not try to add more water by tilting or
shaking the bottle.
NOTE: Fill the iSi Siphon with water only. Do not
add extra ingredients.
Equipment Setup
3. Insert the riser tube with gasket (2343,
4. Screw the head onto the bottle so that it
5. Insert 1 iSi soda charger into the charger
6. Screw the charger holder with the inserted
47080601_SMC_GA_kurz.indb 9
"Expanded drawing")
into the bottle until it stops.
water until the water spills out of the
measuring tube.
see "Expanded drawing") into the bottle
through the measuring tube.
is straight and tighten by hand.
holder.
iSi soda charger onto the head until you can
hear that all of the charger contents have
flowed into the siphon.
9
EN
08.11.18 15:00
Publicidad
