Aqua Medic Mistral 200 Manual De Instrucciones página 4

Aquarium membrane air pump with a maximum capacity of 300 l (79 gph), (Mistral 200) or 380 l/h
(100 gph) (Mistral 300)
In purchasing this unit, you have selected a top quality product. It has been specifically designed for aquarium
use and has been tested by experts. This unit will efficiently meet the air supply requirements of most types of
aquarium.
1. Features
The Mistral membrane air pumps are designed for universal use. At the Mistral 300, the airflow can be adjusted
over a wide range so it meets the exact requirements of the equipment being supplied. This is done via a slide
control which adjusts the magnetic circuit and not the air pressure. The Mistral 200 has a fix output.
The housing is made from cast aluminium and this, combined with the magnetic control system and the vibration
reducing rubber feet, results in exceptionally quiet operation.
2. Technical Data
Type:
Power requirements:
Power uptake:
Maximum capacity:
Capacity at 1 m (3 ft) depth (100 mbar, 1.45 psi):
Maximum pressure:
Connection pressure side:
Cable length:
Weight:
Housing:
7
6
5
4
3
2
1
0
0 100
Fig. 1: Capacity of Mistral 200 and 300
3. Connections
The pump is connected to the equipment it supplies with aquarium air tube (1/4", 4/6 mm). If ozone is to be
used, ozone resistant tubing (e. g. silicone) must be used.
4. Installation
The pump should be positioned in a dry place. Care should be taken to ensure that water cannot enter the pump
when, for instance, it is switched off for aquarium maintenance or during a power failure. There are two methods
of installation:
4
Operation Manual ENG
Mistral 200/300
200
Capacity l/h
Mistral 300
230 volts / 50 Hz
8 watts
380 litre/hour (100 gph)
300 litres/hour (79 gph)
470 mbar (6.8 psi)
air tube 4/6 mm (¼")
3 m
1.75 kg (approx. 3.7 lbs)
cast aluminium
300 400
Mistral 200
230 volts / 50 Hz
4 watts
300 litres/hour (79 gph)
200 litres/hour (53 gph)
250 mbar (3.6 psi)
air tube 4/6 mm (¼")
3 m
1,36 kg (approx. 3.1 lbs)
cast aluminium